Control Cables


Control Cables

 
Authorised Distributor for Polycab Control Cables & Politech Shielded Cables - Shital Electric Co
 

The specification of control cables are as follows

 
VOLTAGE
Control cables can be used on AC Voltage up to & including 1100 V or DC up to & including 1500 V.
Size
1.5 Sq. mm. & 2.5 Sq. mm. up to 61 Cores in Control Cable.
CONDUCTOR
Annealed Bare Electrolytic Copper / Aluminum Conductor conforming to IS:8130:1984..
INSULATION
Conductor are insulated with PVC Compound as per IS:5831:1984.
LAYING Of CORES
Cores are laid up with a suitable lay. The Final layer direction shall be kept right hand lay.
INNER SHEATH
The Inner Sheath is applied over laid up of cores by extrusion/wrapping of thermoplastic material.
ARMOURING
It is applied over inner Sheath. It may consist of galvanized Round Steel wires or galvanized Flat Steel Strips conforming to IS:3975. Round Wire armoring is provided , where the calculated diameter under Armour is 13.0 mm. Above this, armoring is either round wire/steel strip.
OUTER SHEATH
A final covering of PVC Compound, conforming to IS:5831:84, is applied over Armoring in case of Armored Cable or over Inner Sheath in case of Unarmored Cable, called as "Outer Sheath".The Insulation, Inner Sheath & outer sheath can be HR PVC, FRLS PVC or FRHF Compound depending upon their application.
TYPICAL APPLICATION
The Control Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations.
 
Authorized Distributor & Stockist - Polycab Electric Cables & Wires and Politech Shielded Cables
 
 

Contact Us

Shital Electric co. is leading Authorized Stockist & Dealers of "POLYCAB" electrical cables & wires

Our Location

B/006 Ramji House, Jambulwadi, Kalbadevi Road, Mumbai - 400 002.

Social Media

Write Us